 |
| We
Design, Develop, Manufacture and supply hydraulic
machines, hydraulic /pneumatic system and equipment
in all sectors of industry.
The typical application of these systems are Press, Precision Automation, Low Cost Automation, Positioning, Linear and Rotary Motion controller, Metal Forming, High-Tech Polishing and Grinding, Printing Machinery, Controlled Clamping and Actuation.
We serve all the major mechanical engineering and process industries including:
|
|
HAND TOOL PLANTS |
|
PROCESS INDUSTRY |
|
STEEL PLANTS |
|
ROLLING MILLS |
|
SUGAR MILLS |
|
RAILWAYS |
|
DEFENSE |
|
AEROSPACE |
|
MINING |
|
|
AUTOMOBILE INDUSTRY |
|
ENGINEERING INDUSTRY |
|
PLASTIC INDUSTRY |
|
MARINE AND NAVAL SYSTEMS |
|
MATERIAL HANDLING |
|
CONSTRUCTION EQUIPMENTS |
|
DIE-CASTING MACHINES |
|
MACHINE TOOLS |
|
ASSEMBLY EQUIPMENTS |
|
| For Indian Railway's tool room workshop, we had produced a few hydraulic special purpose machines such as: |
|
Type VEL/TLRM/400
INTRODUCTION:
VEL Lip Rolling Machine is used for progressive rolling-in for retaining glut ring of railway wheel tyre. The equipment is complete with Main Frame (consisting of Pressure Rolls, Shafts, Pressure Roll Drive & Swivel system), Thrust Rolls, Support Rolls, Sliding Stands, Hydraulic System, Control System, Control System, Metering & Safety Features. The equipment is capable for handling geared wheel sets and simple wheel sets also.
|
 |
| |
Technical
Specification
|
|
| Wheel tread diameter
|
|
Radial thickness of tyre (including flanges)
|
|
Axial thickness of tyre (including flanges) |
|
Rolling force |
| Rolling
speed |
| Main motor |
| Hydraulic
pump motor |
| Tensile
strength of tyre to be rolled |
|
|
Minimum 600 mm, Maximum 1200 mm |
| 110 mm to 140 mm
|
| 120
mm 140 mm |
|
315 kg/ cm2 |
|
2.2 mm/sec |
| 7.5
HP |
| 1.5
HP |
| 110-125
kg/cm2 |
| |
|
|
|
| |
| TOP |
| |
Type : VEL/BL/75
INTRODUCTION:
VEL HYDRAULIC SCRAP BAILING PRESS is used for making bails of M.S. Scrap obtained from turning the EMU wheel sets installed at Pit wheel lathe. The M.S. Scrap obtained will be in the form of continuos ribbons and will be take a shape of approximate 1 meter diameter of bail.This equipment is a combination of mechanical, hydraulic and electrical systems.
|
 |
|
| |
Technical
Specification
|
|
| Capacity
of horizontal pressing cum ejecting ram |
| Stroke
of horizontal pressing cum ejecting ram
|
| Capacity
of main pressing ram |
| Stroke
of main pressing ram
|
| Bailing
chamber |
| Bale
size |
| Capacity
of front door cylinder |
| Stroke
of front door cylinder |
| Weight
of the bale |
| Working
pressure |
| Electric
motor |
|
| 75
Tons. |
| 1200
mm. |
| 50
Tons. |
| 1000
mm. |
| 1000
mm x 1000 mm x 500 mm. |
| 500
mm x 500 mm x 250 mm. |
| 5
Tons |
| 75
mm. |
| 30
kgs. |
| 200
bar |
| 10
HP, 3 Phase, 440 V, 1440 rpm |
|
|
|
|
|
|
| TOP |
|
|
|
|
|
| | | |
|
© 2003-05 Vel Engineering Services. All Rights Reserved Webpartner: Niftysoft Solution, India.
|
|
|
